Quick Quote
Containers Direct logoQuality you can see, experience you can trust.
Containers Direct logo
Quality you can see, experience you can trust.

************Our office closes for the bank holiday at 5.00pm on Frid 24th May, and will reopen on Tues 28th May at 9.00am************

<< | < | > | >>
Shipping Container Conversions 20ft with office partition and roller shutter click to zoom image

Shipping Container Conversions 20ft with office partition and roller shutter

Call For Delivery Costs: 0800 061 2575
This container is going to a dinosaur themed adventure golf course in London! The large section of the container will be used to store equipment for the course, and the small section, with the roller shutter window, is going to be used as the ticket office.
CD Code CS30600

Special Features

  • No End Doors

  • S1 Doors in the side

  • Painted Ral 9003 Signal White

  • Internal partition with internal door

  • Small 6ft x 8ft office section

  • Melamine lined and insulated

  • Vinyl flooring

  • Electric roller shutter

  • Electrics

The doors

As this conversion requires no end doors (these are being replaced with side doors and an internal door), the first thing we must do is remove the standard shipping container end doors and replace the open end with a new end wall. For more on this step, read our article on making a new end wall. On this job, we took a larger 40ft container and cut down to 20ft, using the section left without the doors to proceed with.

Side doors

We start by cutting an aperture into position in the side of the container. To this we weld in a steel frame that we can attach the new doors to. These doors are made from flat steel panels that are ideal for frequent use on containers used for storage - this section of the container is to be used for storing equipment.

Roller shutter

The conversion requires a small 3ft wide x 4ft drop roller shutter, in the smaller partitioned side of the container. As with the fitting new doors, first we must cut the correct size aperture into position, and then fit a frame to hold the shutter.

The flooring

The ply floor is overlaid with vinyl.

Melamine lining and insulation

Lining and insulation controls the temperature within the container, eliminates condensation, and reduces noise levels. The melamine boards are easy to clean with a quick wipe down. To line, first we create a timber frame into which we pack in rockwool insulating material, and then fit 8mm thick melamine boards over the top of this.

The Partition

To create the 6ft x 8ft area to be used as a small office, we created a partition, with a 14ft high x 6ft wide timber door fitted into it. We used a timber frame and melamine board, as used to line the container. The office section incorporates the roller shutter window.


The container is fitted with an electrical package that includes:

  • Consumer Unit

  • External Hook Up

  • 3 x 5ft strip Lights

  • 4 x Double Sockets

  • 2 x 2Kw Mounted Convector Heater

The completed container - repainted in white

The finished container at Dinosaur Escape!


As with any product, specification is subject to change without prior notification. You are advised to confirm current specification before buying.
We have placed cookies on your browsing device to enable this website to function correctly.
Further usage of this website indicates you are happy for us to do this..
Find out about the cookies we have set and how we use them.